PDF Operator & Parts Manual Raymond RG30 Hand Pallet Truck - 485 KB
Get a two-in-one resource with this combined owner's operating instructions and replacement parts manual for the Raymond RG30 Hand Pallet Truck.
It offers comprehensive guidance on how to safely and efficiently operate your pallet truck.
When it's time for maintenance, the detailed parts section with diagrams makes identifying and ordering the right components straightforward.
This manual is an invaluable tool for both operators and service technicians seeking to keep their material handling operations running smoothly.
PDF Viewer
Viewer loads when you scroll here
SHARE THIS MANUAL
Download the PDF Manual
PDF viewer loading area
Text Preview from This Manual
The text below was extracted from the visible preview pages to help you confirm the manual contents before download.
--- Page 1 ---
Owner’s, Operating Instructions,
and Replacement Parts Manual
Model RG30 - Hand Pallet Trucks
Model RG30 - Hand Pallet Trucks
Owner’s, Operating, and Parts Manual
--- Page 3 ---
• Use extreme care when cornering. If operating
at too high a speed, the load could fall from the
hand pallet lift truck.
Parking the Hand Pallet Lift Truck
When parking the hand pallet lift truck, follow these
instructions:
• Make sure that the fork frame is fully lowered.
• Never park on an incline or with a raised load.
• Never park in areas that could obstruct other
traffic or work areas.
Parking the Hand Pallet Lift Truck
• Never park in areas that could cause personal
injury or damage to any equipment.
8 1180454B
--- Page 4 ---
• The employer shall ensure that each powered industrial
Selected OSHA Regulations for Lift Trucks truck operator is competent to operate a powered industrial
truck safely, as demonstrated by the successful completion
of the training and evaluation specified in this paragraph. (l)
Note: Some or all of the following may not be (1) (i)
applicable to your hand pallet lift truck. • Prior to permitting an employee to operate a powered
industrial truck (except for training purposes), the employer
The use of forklift trucks in the workplace is governed by various shall ensure that each operator has successfully completed
regulations. In the United States, the Federal Occupational Safety the training required by this paragraph. (l) (1) (ii)
and Health Administration (OSHA) has issued regulations which • Trainees may operate a powered industrial truck only under
cover the majority of workplaces. the direct supervision of persons who have the knowledge,
In addition, several states have implemented regulations which training, and experience to train operators and evaluate their
apply instead of the Federal regulations. competence and where such operation does not endanger the
trainee or other employees. (l) (2) (i) (A) (B)
Check with your local OSHA office or provincial Labor Bureau to • Training shall consist of a combination of formal instruction
confirm which regulations govern your workplace. (e.g. lecture, discussion, interactive computer learning,
Because of their wide applicability, this section of your manual videotape, written material), practical training
lists several parts of the Federal OSHA regulations that might be (demonstrations performed by the trainer and practical
of particular importance to your workplace. exercises performed by the trainee), and evaluation of the
operator’s performance in the workplace. (l) (2) (B) (ii)
The full text of the Federal regulations can be found in the Code [Editorial Note: For required training program content, refer
of Federal Regulations at 29 CFR Section 1910.178. to (l) (3) (i) (A-M) and (l) (3) (ii) (A-I).]
Selected OSHA Regulations for Lift Trucks
The following citations are followed by a reference to the • Refresher training, including an evaluation of the
appropriate subparagraph of the regulations. effectiveness of that training, shall be conducted as required
by paragraph (l) (4) (ii) to ensure that the operator has the
• Modifications and additions which affect capacity and safe knowledge and skills needed to operate the powered
operation shall not be performed by the customer or user industrial truck safely. (l) (4) (i)
without manufacturers prior written approval. Capacity,
• An evaluation of each powered industrial truck operator’s
operation and maintenance instruction plates, tags or decals
performance shall be conducted at least once every three
shall be changed accordingly. (a) (3)
years. (l) (4) (iii)
• The user shall see that all nameplates and markings are in
place and are maintained in a legible condition. (a) (6)
Model RG30 - Hand Pallet Truck 19
--- Page 5 ---
Pump and Handle Assembly, Manual
52
43
53
55
42 53
54
1 8
41
9 38 51
40
7
39
10 36
2 11 37
12
35 56*
44
13
14 34
33
15 50
Pump and Handle Assembly, Manual
49
19 32 31
48
18
30
3 17 29
27 28 47
26 46
16 45
4
23
22
25
5 20 23
21
24
17
6
ERGOPUMPMANUALN
Figure 5: Pump and Handle Assembly, Manual
30 1180454B
--- Page 6 ---
FIGURE 7
QTY PART NUMBER DESCRIPTION USED ON
ITEM NO.
1 1 1134731 Charger, Battery
2 1 1-074-087/005 Clamp, Cable
3 3 49854-09 Battery Connector
4 1 PC-3017 Button, Lift
5 1 1160927/001 Power Pack, Hydraulic
6 1 1130733 Harness (Main)
7 1 1099187/018 Battery Cable, 14 in.
Electrical Components
8 1 1099187/019 Battery Cable, 20.5 in.
9 2 301253-000 Cover, Terminal
10 1 1130732 Connector/Harness, Remote
11 1 22226-02 Solenoid
12 2 11813-23 Grommet
13 1 15677-11 Clamp, Cable
14 1 590-587/105 Fuse R
15 1 307371-000 Standoff
17 1 PR-8574 Valve, Descent (Not Shown)
18 3 49852-08 Lug Set, Battery Connector (Not Shown)
R= Recommended Spare
List 7: Electrical Components
Model RG30 - Hand Pallet Truck 41