PDF Installation Instructions Manual CNH Wheel Loader Hydraulic Drain Third Function - 1011 KB
This manual provides detailed installation instructions for the Hydraulic Drain Third Function (Z BAR) kit on various CNH wheel loaders.
It covers models including the 221F, 321F, W70C, and W80C.
Technicians should follow these step-by-step procedures to ensure a safe and correct installation of the auxiliary hydraulic system.
This guide is crucial for expanding the functionality of your wheel loader.
PDF Viewer
Viewer loads when you scroll here
SHARE THIS MANUAL
Download the PDF Manual
PDF viewer loading area
Text Preview from This Manual
The text below was extracted from the visible preview pages to help you confirm the manual contents before download.
--- Page 1 ---
INSTALLATION INSTRUCTIONS
51409158
HYDRAULIC DRAIN THIRD FUNCTION (Z-BAR)
APPROXIMATE INSTALLATION TIME: 4.0 hours
Lec - 51409165
Issue date January 2018
EN
--- Page 3 ---
CNH Industrial Italia S.p.A. viale delle Nazioni, 55 Modena Italy 41122
SERVICE - Technical Publications & Tools
PRINTED IN ITALY
© 2018 CNH Industrial Italia S.p.A. All rights reserved.
No part of the text or illustrations of this publication may be reproduced.
CNH Industrial Italia S.p.A reserves the right to make improvements in design and changes in specifications at
any time without notice and without incurring any obligation to install them on units previously sold. Specifications,
descriptions, and illustrative material herein are as accurate as known at the time of publication, but are subject
to change without notice.
Availability of some models and equipment builds varies according to the country in which the equipment is being
used. For exact information about any particular product, please consult your CNH Industrial dealer.
CNH Industrial is a trademark registered in the United States and many other countries, owned or licensed to CNH
Industrial N.V., its subsidiaries or affiliates.
Any trademarks referred to herein, in association with goods and/or services of companies, other than owned by or
licensed to CNH Industrial N.V., its subsidiaries or affiliates, are the property of those respective companies.
January 2018
EN
--- Page 4 ---
2 - ASSEMBLAGE
12. Fixer le flexible de vidange (10) aux tuyaux hydrau-
liques à l'aide des attaches doubles (9).
13. Fixer le flexible de vidange (10) aux flexibles de
conduite du bras en utilisant les trois attaches de
câble (4) comme indiqué.
LEIL17CWL0141GB 15
Post-montage
14. Remplir le réservoir hydraulique.
Consulter les spécifications dans le Manuel de l'utili-
sateur.
15. Mettre l'interrupteur principal de la batterie en position
« ON » (Marche).
16. Démarrer le moteur.
11
FR
--- Page 5 ---
2 - MONTAGE
Einbau
HINWEIS: Wenn ihre Maschine nicht mit der Option HIGH FLOW ausgestattet ist, befolgen Sie die Schritte 2 bis 4.
2. Montieren Sie das T-Anschlussstück (1) am vorhande-
nen Hydraulikstecker (C). Ziehen Sie sie mit dem Stan-
dardanzugsmoment fest.
LEIL17CWL0143AB 4
HINWEIS: Richten Sie das T-Stück (1) in dem in Abbildung
5 dargestellten Winkel aus.
LEIL15CWL0226AB 5
3. Montieren Sie den Ablaufschlauch (11) am T-An-
schlussstück (1). Ziehen Sie sie mit dem Standardan-
zugsmoment fest.
LEIL15CWL0226AB 6
4. Schließen den Ablaufschlauch (H1) an der Vorderseite
des T-Anschlussstücks (1) an. Ziehen Sie sie mit dem
Standardanzugsmoment fest.
LEIL17CWL0150AB 7
8
DE
--- Page 6 ---
1 - CONTENUTO DEL KIT
LEIL17CWL0140FB 2
Con opzione HIGH FLOW
5
IT
--- Page 7 ---
51409158 - HYDRAULIC DRAIN THIRD FUNCTION (Z-BAR)
CASE CONSTRUCTION
221F HS 321F HS
221F STD 321F STD
NEW HOLLAND CONSTRUCTION
W70C W80C
W70C HS W80C HS
Lec - 51409165_ES
Fecha de publicación Enero 2018
ES