PDF Operator's Manual Tigercat H855D LH855D Harvester - 6 MB
This operator's manual is your complete guide to the Tigercat H855D and LH855D Harvesters.
It covers all aspects of machine operation, from startup procedures to advanced functions.
Safety information is prominently featured throughout the manual to protect the operator and the equipment.
Following the daily maintenance checks outlined in this guide will ensure your harvester remains productive and reliable in the tough forest environment.
PDF Viewer
Viewer loads when you scroll here
SHARE THIS MANUAL
Download the PDF Manual
PDF viewer loading area
Text Preview from This Manual
The text below was extracted from the visible preview pages to help you confirm the manual contents before download.
--- Page 1 ---
H855D/LH855D Harvester
OPERATOR’S MANUAL
SERIAL NUMBER 85532001 TO 85533000
SERIAL NUMBER 85582001 TO 85583000
ISSUE 3.0, FEBRUARY 2020
Tigercat Industries Inc.
P.O. Box 637
Brantford, Ontario
Canada N3T 5P9
Tel: (519) 753-2000
Fax: (519) 753-8272
--- Page 3 ---
Tigercat H855D/LH855D Harvester Introduction
6750 Earth-moving machinery – Operation and maintenance -- Format and content of manuals
6814 Machinery for forestry -- Mobile and self-propelled machinery -- Terms, definitions and classification
8082 Self-propelled machinery for forestry --Roll-over protective structures -- Laboratory tests and
performance requirements
8083 Machinery for forestry -- Falling object protective structures-- Laboratory tests and performance
requirements
8084 Machinery for forestry -- Operator protective structures -- Laboratory tests and performance
9244 Earth-moving machinery – Safety signs and hazard pictorials -- General principles
9533 Earth-moving machinery -- Machine-mounted forward and reverse audible warning alarm -- sound
test method
10532 Earth-moving machinery – Machine mounted retrieval device -- Performance requirements
10533 Earth-moving machinery -- Lift-arm support devices
10570 Earth-moving machinery – Articulated frame lock – Performance requirements
11112 Earth-moving machinery -- Operator's seat –Dimensions and requirements
11512 Machinery for forestry -- Tracked special machines – Performance criteria for brake systems
11684 Tractors and machinery for agriculture and forestry, powered lawn and garden equipment -- Safety
signs and hazard pictorials – General principles
13766 Earth-moving machinery -- Electromagnetic compatibility
13852:1996 Safety of machinery-- Safety distances to prevent danger zones being reached by the upper limbs
14269-4 Tractors and self-propelled machines for agriculture and forestry -- Operator enclosure environment
-- Part 4: Air filter element test method
14982 Agricultural and forestry machinery -- Electromagnetic compatibility -- Test methods and
acceptance criteria
15078 Machinery for forestry -- Log Loaders --Log loaders – Location and method of operation of two-
lever operator controls
I hereby declare that the equipment named above has been designed to comply with the relevant
sections of the above referenced specifications and is in accordance with the requirements of the
Directive(s)
Signed by: ............................................................................................................................
Name: Anthony Iarocci
Position: President
Done at
Brantford Ontario
On December 16, 2014
Document ref. No.: 5354-H855D
The technical documentation for the machinery is available from:
Name: Stewart Booth
Address: Darnleyhill
Tullynessle
Alford, Aberdeenshire
Scotland, AB33 8AX
xi
--- Page 4 ---
Tigercat H855D/LH855D Harvester Safety
AVOID INJURY FROM BACKOVER
ACCIDENTS
Before moving machine, be sure all persons are
clear of the area.
Be alert for bystanders moving into the work area.
Use horn to warn bystanders before moving the
machine.
When using a signal person, keep the person in
view at all times. Be sure the signal person is clear
before backing up.
To avoid backover accidents:
• Look around before you back up. Be sure that
everyone is clear.
• Keep motion warning alarm in working
condition. The motion warning alarm must
sound when the machine is moving in forward
or reverse.
• Use a signal person when backing up if view is
obstructed. Keep the signal person in view.
• Learn the meaning of all flags, signs
and markings on the job site and who is
responsible for signalling.
• Keep windows, mirrors and lights in good
condition.
• Dust, heavy rain, fog, snow etc. can reduce
visibility. As visibility decreases, reduce speed
and use proper lighting.
Turn off the engine when refuelling. Do not refuel
the machine or work on the fuel system while
smoking or near open flame or sparks.
1.9
--- Page 5 ---
Tigercat H855D/LH855D Harvester Safety
SERVICING AND REPAIR
WARNING
Before beginning any service work on the
harvesting head, place the machine on level
Avoid the risk of chain shot. Never operate ground, place the harvesting head on the ground
the harvesting head so that the saw bar and properly support the boom (FIG. 5).
is directly in line with the cab or any
personnel!
• Do not process trees with the saw guide STICK CYLINDERS
FULLY EXTENDED
(bar) aligned with the operator’s cab. The
hydraulically driven saw chain reaches high
speeds and is an extreme hazard if the chain TIP OF STICK BOOM
breaks. FULLY SUPPORTED
845C-020 FIG.5 - PARKING BOOM
• Operate so that the chip discharge area of
the harvesting head is not directed at people, Stop the machine engine and turn the battery
livestock, houses, buildings, roads or other disconnect switch to the OFF position. Install
machines. any safety chains or locking parts required by
the harvesting head manufacturer. Ensure that
• Be particularly observant with the zone in line any accumulators on the harvesting head are
with the chain saw. completely relieved of hydraulic pressure. follow
the specific safety, maintenance, and operating
WARNING procedures provided by the harvesting head
manufacturer.
• Never place any part of your body between
the drive wheel arms or delimbing arms. This
area is a crush zone. Keep clear to avoid
personal injury or death.
• Never place any part of your body near the
drive wheels. Avoid the risk of entanglement
in moving parts. Keep clear to avoid personal
• THROWN OBJECTS HAZARD. injury or death.
• KEEP CLEAR AS HIGH SPEED • Never place any part of your body in front
EJECTION OF CHAIN SAW
PARTS CAN CAUSE SERIOUS of the saw guide (bar). Avoid the risk of
INJURY OR DEATH. dismemberment. Keep clear to avoid personal
• NEVER POSITION HEAD SO THAT injury or death.
CHAIN SAW BARS ARE IN LINE
WITH ANY BYSTANDERS, OTHER • When working in the area of the drive wheel
MACHINES OR CAB.
29921A R1 arms, delimbing arms, or drive wheels and
when changing the saw guide (bar) or saw
chain the machine must be completely shut
down, with the battery disconnect switch to the
OFF position.
• Do not change the pressure settings of
any hydraulic valves or make structural
modifications to the harvesting head without
obtaining authorized instructions from the
harvesting head manufacturer.
1.19
--- Page 6 ---
Tigercat H855D/LH855D Harvester Safety
MACHINE MODELS EQUIPPED WITH SWITCHABLE ER BOOM FUNCTION
AN ER BOOM SYSTEM These machines are equipped with a switchable
ER valve to provide ER boom function or non-ER
WARNING boom function. This function is switched on or off
by a button switch and the Computer Controller.
This machine is equipped with an ER boom For complete details refer to ER BOOM SYSTEM,
system. Because of this, it may behave SPECIAL OPERATING INSTRUCTIONS in
in an unexpected manner compared to a SECTION 2 of THIS MANUAL.
conventional boom system.
Pay attention to the following when servicing
the ER Boom System. Certain hydraulic circuits
on this machine are inter-connected in order
to provide level head-travel and to recirculate
hydraulic oil to reduce heat generation and fuel
consumption. As a result, disconnecting hydraulic
lines from one cylinder may release pressure
in a different cylinder at the same time. Before
attempting to disconnect hydraulic hoses or
perform work on the boom system, ensure that:
1. The machine is parked on level ground with
the harvesting head on the ground (FIG. 1).
2. The stick cylinders are fully extended (FIG. 1)
or the hoist cylinder fully retracted (FIG. 2).
3. The telescopic boom (if equipped) is fully
retracted and the tip of the stick boom is 55987BUNI R0
supported at the rotator pin.
Do not rely on the harvesting head to
support the boom system during servicing.
Slow leakage in the hydraulic components
can cause the harvesting head to move
unexpectedly.
STICK CYLINDERS
FULLY EXTENDED
TIP OF STICK BOOM
FULLY SUPPORTED
845C-020 FIG.1 - PARKING BOOM
HOIST CYLINDER
FULLY RETRACTED
TIP OF STICK BOOM
FULLY SUPPORTED
845C-021 FIG.2 - PARKING BOOM
1.29
--- Page 7 ---
Tigercat H855D/LH855D Harvester Safety
Dry chemical extinguishers should be rated • Ensure that after you have received the
ABC and pressurized water extinguishers training as outlined above, that you know how
should be rated A. to use the fire extinguisher, the pressurized
water system (if applicable) and the fire
Class A fires involve ordinary combustibles
suppression system on your machine. There is
such as wood, cloth, paper, rubber and many
not enough time available to read instructions
plastics, Class B fires occur with flammable
during a fire emergency**.
liquids such as diesel fuel, oil and grease and
Class C fires apply to energized electrical • Ensure that all information necessary for you
equipment. to immediately contact all sources of help
(local fire department, etc) in the event of a fire
• Ensure the nozzle of any hand held
emergency is recorded and readily available at
extinguisher and pressurized water system
all times.
available on the machine and at the work site
fits within the fire extinguisher access holes in WHAT TO DO WHEN A MACHINE FIRE
the doors of the machine. OCCURS
• Ensure that your fire detection system* is in If operating the machine when a fire occurs:
working order. Refer to FIRE DETECTION 1. Lower all working attachments to the ground.
SYSTEM in SECTION 2 of THIS MANUAL.
2. Turn OFF the engine.
• Ensure that your fire suppression system** is
charged and in working order. Refer to FIRE 3. Activate the fire suppression system**.
SUPPRESSION SYSTEM in SECTION 2 of 4. Radio or call for help. Be certain to report a
THIS MANUAL. fire immediately.
• Ensure that you are familiar with the 5. Exit the machine taking fire extinguisher and
recommended procedures for fire contained in pressurized water system hose (if applicable)
the emergency action plan of your company. with you.
• Ensure that you follow all national, state/ 6. At all times ensure your own personal safety
provincial and local regulations dealing and the safety of anyone that may be in the
with fire fighting in effect in your specific area. Approach any fire with extreme caution.
geographic region. Regulations will vary from All fires can be very dangerous and life
region to region but most will usually require threatening.
that: 7. Only if you can safely do so, turn OFF the
1. Workers assigned to fire fighting duties battery disconnect switch.
must be physically capable of performing Before deciding to fight the fire, be certain that:
them safely and effectively.
1. The fire is small and not rapidly spreading.
2. Workers designated to use fire fighting
2. There is a clear, safe escape route to your
equipment as part of an emergency action
back.
plan must receive full and proper training
from a qualified instructor. 3. You have received training in the use of the
available fire extinguishing systems and
3. Whenever portable fire extinguishers
are confident that you can operate them
are provided for use in the workplace,
effectively.
training must be provided to familiarize
workers with the general principles of fire 4. If in any doubt about whether or not to fight the
extinguisher use and the hazards involved fire – DON’T. Instead stand well clear of the
with fire fighting. fire and wait for help to arrive.
4. Training must be provided upon initial 5. Be aware that engine coolant, diesel fuel or
employment and at least annually hydraulic hoses could fail during a fire. If this
thereafter. happens, hot coolant, fuel or oil could possibly
be ignited by the fire.
6. If possible a dry chemical fire extinguisher
or fire suppression system should be used
first to fight a machine fire. Then immediately
afterwards use the pressurized water hose
supplied with the machine (if applicable) or a
1.39
--- Page 8 ---
Tigercat H855D/LH855D Harvester Safety
NO RIDERS THROWN OBJECTS HAZARD
WARNING
• THROWN OBJECTS HAZARD.
• KEEP CLEAR AS HIGH SPEED
EJECTION OF CHAIN SAW
PARTS CAN CAUSE SERIOUS
INJURY OR DEATH.
• NEVER POSITION HEAD SO THAT
CHAIN SAW BARS ARE IN LINE
WITH ANY BYSTANDERS, OTHER
MACHINES OR CAB.
29921A R1
No riders inside or outside of the machine. Do not This label informs you of the thrown objects
carry passengers either in the cab or anywhere hazard that exists when operating this harvesting
else on the machine. The vehicle seating head. Warn all personnel to stay 150 m (500 ft)
accommodation is for one operator only. Persons away when operating the machine and head.
riding on the outside of the machine are subject During operation objects can be thrown or ejected
to hazards such as falling off the machine, crush at high speed and can travel long distances.
hazards, thrown object hazards and many other Ejection of chain saw parts or other objects can
hazards which could result in death or serious cause serious injury or death.
injury.
Never operate or position the head with the
If any person attempts to climb onto the machine chain saw bars in line with any bystanders, other
during operation, stop the machine immediately. machines or facing towards the operator’s cab.
Do not operate the machine until other personnel
Orient the bar and chain so high velocity parts are
are a safe distance away from the machine.
thrown away from any bystanders and equipment.
Follow chain manufacturer’s guidelines for proper
use and maintenance.
Be aware of the location of other machines and
personnel who are working in the harvesting area
and be prepared to stop operations if they enter
your working area without warning. Be prepared
for this potential hazard and take appropriate
action if required!
Should this harvesting head be purchased loose
without a machine, one of these labels will be sent
along with the head to be affixed to the inside of
the cab at a future date.
1.49
--- Page 9 ---
Tigercat H855D/LH855D Harvester Controls and Operation
SWING BRAKE – SWITCH WITH LIGHT ....................................................................................................2.18
SWING CONTROL, JOYSTICK .......................................................................................................... 2.11, 2.12
TRACK DRIVE, FOOT PEDALS ...................................................................................................................2.13
TRAVELLING (BOOM RAISED) ................................................................................................................ 2.110
USB PORT - COMPUTER DISPLAY ............................................................................................................2.16
VACUUM SWITCH, HYDRAULIC OIL TANK ...............................................................................................2.30
WINDOWS
CARE OF POLYCARBONATE WINDOWS
CAUTIONS ........................................................................................................................................... 2.114
CLEANING INSTRUCTIONS .............................................................................................................. 2.114
CONCEALING HAIRLINE SCRATCHES ........................................................................................... 2.114
FIRE PRECAUTIONS .......................................................................................................................... 2.115
GRAFFITI REMOVAL .......................................................................................................................... 2.115
INSPECTION AND MAINTENANCE .................................................................................................. 2.113
RESISTANCE TO CHEMICALS .......................................................................................................... 2.113
RESISTANCE TO WATER ................................................................................................................... 2.113
WORK LIGHTS SWITCH ..............................................................................................................................2.22
2.5
--- Page 10 ---
Tigercat H855D/LH855D Harvester Controls and Operation
The power roof is operated by an Electric Pump F
Hydraulic System.
B
The electric pump assembly is located in the A
compartment behind the cab beside the hydraulic E
tank and filter compartment. This system is self
contained, in which it has its own hydraulic oil
(Dexron III) tank. E
D
The machine is also equipped with a hydraulic
hand pump in the event that the roof needs to be
opened manually. For more information refer to
DOORS, SERVICE ACCESS in THIS SECTION.6. C
LS855D-015
SERVICE LIGHTS – SWITCH (B)
855*2021 to 855*3000
This is a two position switch labeled ON – OFF. A ON/OFF Button
Use to turn ON the service lights located in the B LCD Screen
roof and pump area. C Micro USB Service Port
D Selection Button
MASTER ALARM (C) AND MASTER E Status Indicator Light(s)
ALARM LIGHT (D) F Rotary Knob
The computer displays messages activate the
master alarm and alarm light whenever a system The heater, heats and circulates engine coolant
fault occurs. through the engine to heat up the engine oil and
NOTE: The computer automatically performs a through the hydraulic tank to heat up the hydraulic
bulb test at engine start up to ensure that master oil.
alarm and alarm light are functioning. Refer to There is a solenoid valve controlling the flow
COMPUTER – MESSAGES in THIS SECTION. of coolant to the Hydraulic oil tank heater. This
solenoid valve is controlled directly by the heater
ENGINE COOLANT HEATER unit. The programming of the heater unit in the cab
CONTROL PANEL – OPTIONAL (E) will determine when the heater is ON and when it
This digital control panel is used on machines will turn OFF.
equipped with the optional diesel-operated engine Consult the manufacturer’s operation manual for
coolant heater. additional information.
A B IMPORTANT!
During warm weather when the engine coolant
heater is not in use operate the heater for a period
I of 20 minutes monthly. This will circulate engine
coolant to all components of the heater system.
H
NOTICE
Open the engine coolant hot water shut-off
valves before operating the coolant heater.
G F E D C
Damage to the engine coolant heater pump
1075-087B may result if the valve is closed.
855*2001–855*2020 Refer to ENGINE COOLANT SHUT-
A Time Display
OFF VALVE in THIS SECTION for more
B Heater ON Indicator
C Forward
information.
D Reverse
E Instant Heating
F Program Selection
G Time/Day
H Memory Location
I Day of Week
2.15
--- Page 11 ---
Tigercat H855D/LH855D Harvester Controls and Operation
AUTOMATIC OPERATION DISCHARGE OF THE SYSTEM
There are seven thermostats mounted in the When an electrical signal (automatic or manual) is
engine and hydraulic enclosures which are received by the control panel it sends a discharge
wired to the control panel. The thermostats are signal to the electrical actuator located on top
automatic heat detection devices and are set to of the pressurized cylinder. When activated the
close at 177°C (350°F). When a thermostat closes electrical/pneumatic actuator extends a control
it sends an electrical signal to the control panel shaft which mechanically opens the agent
which activates the fire suppression system. cylinder valve. This releases the dry chemical in
the discharge area protected by the system. The
MANUAL OPERATION
control panel will also automatically shut down the
engine and all electrical power.
RED NITROGEN
A FIRE
BUTTON
ACTUATOR NOTE: The engine does not shut down
automatically when the fire suppression system
is activated using the nitrogen actuator. When
using the nitrogen actuator to activate the fire
B
suppression system the operator must shut the
engine off manually.
The automatic engine shutdown feature will
either shutdown the engine immediately when
the fire suppression system is discharged (non-
leveling machines) or will delay the shutdown for
860C-414 H845D-040
a period of between 10 to 15 seconds for leveling
Manual Actuation Switches machines. The time delay period is a factory
A Pull Locking Pin setting. This delay feature allows the operator to
lower the load or move the machine to a safer
The fire suppression system can also be activated location before the engine shuts down. The
manually using the manual actuation switch. operator can extend the engine shutdown delay
To manually operate the system: feature by pressing the RELAY RESET button on
the control panel to repeat the preset delay period.
1. Safely lower the boom to the ground. This button can be pressed repeatedly until the
2. Pull locking pin (A). operator has brought the machine to a safe stop.
The RELAY RESET button does not delay the
3. Press red FIRE button. discharge of the fire suppression system.
An electrical signal is sent to the control panel
from the manual actuation switch which activates
the system.
NOTE: In the event of a power failure the system
can be activated by the Nitrogen Actuator located
on the front left post of the cab.
1. Remove Locking Pin (B).
2. Strike down hard on actuator knob.
2.25
--- Page 12 ---
Tigercat H855D/LH855D Harvester Controls and Operation
FUSES AND RELAYS, ENGINE IMPORTANT
COMPARTMENT 24 VOLT ELECTRICAL SYSTEM
There are three areas where Fuse and Relay
Electrical Components are mounted as follows: • Fuse and Relay Rear Panel. Located in the
engine compartment behind the cab.
• Main Electrical Fuse, Battery Disconnect
Relay and Amerex (FSS) 10 A Fuse, located
in the engine compartment beside the battery
box.
10 A FSS
FUSE
BATTERY
DISCONNECT
RELAY
10 A
FSS