PDF Operator Manual Genie GS-1530 GS-1930 GS-2032 GS-2632 GS-3232 GS-2046 - 686 KB
This single operator's manual covers a wide range of Genie GS series scissor lifts, including the popular GS-1930 and GS-2632 models.
It is a must-have guide for ensuring safe operation, outlining all control functions, necessary inspections, and safety precautions.
Familiarity with this manual is key for all users.
PDF Viewer
Viewer loads when you scroll here
SHARE THIS MANUAL
Download the PDF Manual
PDF viewer loading area
Text Preview from This Manual
The text below was extracted from the visible preview pages to help you confirm the manual contents before download.
--- Page 1 ---
Operator's Manual
GS™-1530/32 CE
GS™-1930/32
GS™-2032
GS™-2632
GS™-3232 with
GS™-2046 Maintenance
GS™-2646
Information
GS™-3246
Original Instructions
Sixth Edition
Second Printing
Part No. 133568GT
--- Page 3 ---
Sixth Edition • Second Printing Operator's Manual
Work Area Safety
Maximum capacity - GS-2032 Maximum capacity - GS-2046
Height of platform Maximum capacity Height of platform Maximum capacity
6m 363 kg 6m 544 kg
5.7 m 512 kg 5.7 m 744 kg
3.5 m 693 kg 3.5 m 985 kg
2.4 m 608 kg 2.4 m 873 kg
1m 454 kg 1m 635 kg
Maximum capacity - GS-2632 Maximum capacity - GS-2646
Height of platform Maximum capacity Height of platform Maximum capacity
7.9 m 227 kg 7.9 m 454 kg
6.4 m 442 kg 5.9 m 744 kg
4.5 m 479 kg 4.5 m 798 kg
2.8 m 409 kg 2.8 m 701 kg
1m 281 kg 1m 454 kg
Maximum capacity - GS-3232 Maximum capacity - GS-3246
Height of platform Maximum capacity Height of platform Maximum capacity
9.8 m 227 kg 9.8 m 318 kg
9.1 m 344 kg 9.1 m 483 kg
5.4 m 498 kg 5.4 m 699 kg
3.5 m 433 kg 3.5 m 608 kg
1m 227 kg 1m 318 kg
Part No. 133568GT GS™-30 • GS™-32 • GS™-46 9
--- Page 4 ---
Sixth Edition • Second Printing Operator's Manual
Controls
Controls
Ground Control Panel
1 7A breaker for electrical circuits 4 Platform up/down toggle switch
2 Key switch for platform/off/ground selection Move the switch up and the platform
Turn the key switch to the platform position and will raise. Move the switch down and
the platform controls will operate. Turn the key the platform will lower.
switch to the off position and the machine will be
off. Turn the key switch to the ground position and 5 Red Emergency Stop button
the ground controls will operate.
Push in the red Emergency Stop button to the off
3 Hour meter position to stop all functions. Pull out the red
The hour meter displays the number of hours the Emergency Stop button to the on position to
machine has operated. operate the machine.
Part No. 133568GT GS™-30 • GS™-32 • GS™-46 19
--- Page 5 ---
Sixth Edition • Second Printing Operator's Manual
Inspections
Test Limited Drive Speed Test the Pothole Guards
35 Press the lift function select button. Note: The pothole guards should automatically
deploy when the platform is raised. The pothole
36 Press and hold the function enable switch on
guards activate limit switches that allow the
the control handle. Raise the platform
machine to continue to function. If the pothole
approximately 1.2 m from the ground.
guards do not deploy, an alarm sounds and the
Result: The pothole guards should deploy. machine will not drive or steer.
37 Press the drive function select button. 39 Raise the platform.
38 Press and hold the function enable switch on Result: When the platform is raised 1.2 m from
the control handle. Slowly move the control the ground, the pothole guards should deploy.
handle to full drive position.
40 Press on the pothole guards on one side, and
Result: The maximum achievable drive speed then the other.
with the platform raised should not exceed
Result: The pothole guards should not move.
20 cm/s.
41 Lower the platform.
If the drive speed with the platform raised exceeds
20 cm/s, immediately tag and remove the machine Result: The pothole guards should return to the
from service. stowed position.
42 Place a 2x4 or similar piece of wood under a
pothole guard.
43 Raise the platform.
Result: Before the platform is raised 2.1 m from
the ground, an alarm should sound and the
drive function should not work.
44 Lower the platform.
45 Remove the 2x4 or similar piece of wood.
Part No. 133568GT GS™-30 • GS™-32 • GS™-46 29
--- Page 6 ---
Sixth Edition • Second Printing Operator's Manual
Operating Instructions
Emergency Stop Operation from Platform
Push in the red Emergency Stop button to the off 1 Be sure the battery pack is connected before
position at the ground controls or the platform operating the machine.
controls to stop all functions.
2 Turn the key switch to platform control.
Repair any function that operates when either red 3 Pull out both ground and platform red
Emergency Stop button is pushed in. Emergency Stop buttons to the on position.
Emergency Lowering To Position Platform
1 Pull the emergency lowering knob to lower the 1 Press the lift function select
platform. button.
2 Press and hold the function
Operation from Ground enable switch on the control
handle.
1 Be sure the battery pack is connected before
operating the machine. 3 Move the control handle in the direction
indicated by the markings on the control panel.
2 Turn the key switch to ground control.
3 Pull out both ground and platform red
Emergency Stop buttons to the on position. When lowering the platform, the platform should
stop when it is approximately 2.1 m from the
To Position Platform ground. The descent delay lights will flash and the
alarm will sound. Be sure the area below the
1 Move the up/down toggle switch according to platform is clear of personnel and obstructions
the markings on the control panel. before continuing. To continue lowering, release
Drive and steer functions are not available from the the control handle, and then move the control
ground controls. handle again.
Part No. 133568GT GS™-30 • GS™-32 • GS™-46 39
--- Page 7 ---
Sixth Edition • Second Printing Operator's Manual
Transport and Lifting Instructions
Lifting Instructions
Fully lower the platform. Be sure the extension
deck, controls and component trays are secure.
Remove all loose items on the machine.
Determine the center of gravity of your machine
using the table and the picture on this page.
Attach the rigging only to the designated lifting
points on the machine. There are two 2.5 cm holes
on the front of the machine and two holes in the
ladder for lifting.
Adjust the rigging to prevent damage to the
machine and to keep the machine level.
Center of Gravity Table
Model X Axis Y Axis
GS-1530 49.8 cm 47.2 cm
GS-1532 49.8 cm 47.2 cm
GS-1930 50.8 cm 49.5 cm
GS-1932 50.8 cm 49.5 cm
GS-2032 80.9 cm 53.9 cm
GS-2632 82.2 cm 59.3 cm
GS-3232 78.7 cm 67.3 cm
GS-2046 82.7 cm 56.8 cm
GS-2646 88.2 cm 56.4 cm
GS-3246 83.7 cm 59.9 cm
Part No. 133568GT GS™-30 • GS™-32 • GS™-46 49