PDF Operational Principle Technical Manual Hitachi ZW330-6 Wheel Loader - 5 MB
Dive deep into the systems of the Hitachi ZW330-6 wheel loader with this Operational Principle technical manual.
This advanced guide explains the theory and function of the hydraulic, electrical, and powertrain systems.
It is designed for high-level technicians who need to understand how these systems work together for effective diagnosis and troubleshooting.
This manual is a crucial companion to the standard service manual for complex repairs.
PDF Viewer
Viewer loads when you scroll here
SHARE THIS MANUAL
Download the PDF Manual
PDF viewer loading area
Text Preview from This Manual
The text below was extracted from the visible preview pages to help you confirm the manual contents before download.
--- Page 1 ---
PART NO. TONGE40-EN-00
ZW330-6
WHEEL LOADER
Technical Manual
Operational Principle
TECHNICAL MANUAL OPERATIONAL PRINCIPLE
ZW
330-6
Wheel Loader
URL:http://www.hitachi-c-m.com
TONGE40-EN-00
Service Manual consists of the following separate Part No.
Technical Manual (Operational Principle) : Vol. No.TONGE40-EN
Technical Manual (Troubleshooting) : Vol. No.TTNGE40-EN
PRINTED IN JAPAN (K) 2017, 12 Workshop Manual : Vol. No.WNGE40-EN
--- Page 3 ---
SYMBOL AND ABBREVIATION
Symbol / Name Explanation
Abbreviation
TO Technical manual (Operational principle)Technical manual (Operational Principle).
TT Technical manual (Troubleshooting) Technical manual (Troubleshooting).
T/M Technical manual Technical manual.
W, W/M Workshop manual Workshop manual (Removal and Installation, Disassembly
and Assembly).
MC Main Controller Main controller. MC controls the engine, pump, and valve
according to the machine operating condition.
ECM Engine Control Module Engine controller. ECM controls fuel injection amount
according to the machine operating condition.
VGS Variable Geometry System controller Variable turbo controller. VGS is an exhaust turbo charged
system to supercharge the exhaust energy while running
the engine at slow idle speed. VGS optimizes the turbine
rotation, improves the performance at slow-speed torque
and the acceleration, reduces fuel consumption, and reduces
particulate matter (PM) by adjusting the nozzle opening of
turbine housing.
GSM Global System for Mobile communications Communication controller. GSM is a type of wireless
controller communication system, is used in more than on 100
countries around Europe and Asia, and becomes the factual
global standards of the mobile telephone.
GPS Global Positioning System Global positioning system.
CAN Controller Area Network CAN communication. CAN is a serial communications
protocol internationally-standardized by ISO (International
Organization for Standardization).
A/C Air Conditioner Air conditioner.
OP, OPT Option Optional component.
MPDr. Maintenance Pro Dr. MPDr. is software that troubleshooting, monitoring, and
adjustment.
A/I Auto-Idle Auto-idle.
WU Warming-Up Warming-up.
Li Low (Slow) Idle Slow idle engine speed.
ATT Attachment Attachment. Attachment is optional parts such as breaker,
crusher, and pulverizer in this manual.
HI, Hi High Travel fast position.
LO, Lo Low Travel slow position.
TONGE40-EN-00 SY-1
--- Page 4 ---
SECTION 1 GENERAL
Group 2 Component Layout
Main Component
[ Overview ]
5
4
3
2
10
1
9
8
ZW330-6T01-02-01
3 2
8
6
7
ZW330-6T01-02-02
1- Bucket 4- Front Combination Light 6- Rear Work Light 8- Lift Arm
2- Bell Crank (Headlight, Turn Signal Light, 7- Rear Combination Light (Turn 9- Lift Arm Cylinder
3- Bucket Cylinder Hazard Light) Signal Light, Hazard Light, Tail 10- Bucket Link
5- Front Work Light Light, Brake Light)
TONGE40-EN-00 T1-2-1
--- Page 5 ---
SECTION 1 GENERAL
Group 2 Component Layout
Electrical System (Around Hydraulic Oil Tank)
3
5 1
4
2
ZW330-6T01-02-07
1- Hydraulic Oil Level Sensor 3- Hydraulic Tank 5- Window Washer Tank Motor
2- Emergency Steering Pump 4- Hydraulic Oil Temperature Sensor
TONGE40-EN-00 T1-2-11
--- Page 6 ---
SECTION 1 GENERAL
Group 2 Component Layout
Emergency Steering Group
2
Steering Valve
1
3
4
ZW330-6T01-02-14
1- Emergency Steering Pump 3- Pressure Switch (Emergency Steering)
2- Pressure Sensor (Emergency Steering) 4- Pressure Switch (Main Pump)
Steering Valve Emergency Steering Pump
90T4GB-01-02-20 90TNED-01-02-19
1- Main Relief Valve 1- Electric Motor 3- Relief Valve
2- Overload Relief Valve 2- Gear Pump
TONGE40-EN-00 T1-2-21
--- Page 7 ---
SECTION 1 GENERAL
Group 3 Component Specifications
Engine Accessories
Type COM4D-P
Voltage 12 V
Battery Capacity RC = 320 min (Discharge: 25 A at 80 °F)
Cold Cranking Amps 1000 CCA
Weight 45.5 kg (100 lb)×2
TONGE40-EN-00 T1-3-5
--- Page 8 ---
SECTION 2
SYSTEM
CONTENTS
Group 1 Controller Low Brake Oil Pressure Indicator Control............T2-2-80
Outline..................................................................................... T2-1-1 Low Steering Oil Pressure Indicator Control.......T2-2-82
CAN Circuit............................................................................. T2-1-2 Overrun Alarm Control...............................................T2-2-84
Lift Arm Auto Leveler Height Kickout
Group 2 Control System Control........................................................................T2-2-86
Outline..................................................................................... T2-2-1 Lift Arm Auto Leveler Lower Kickout
Engine Control...................................................................... T2-2-4 Control........................................................................T2-2-88
Accelerator Pedal Failure Control............................. T2-2-6 Quick Power Mode Control.......................................T2-2-90
Auto-Warm Up Control................................................ T2-2-8 Auto Shut-Down Control...........................................T2-2-92
Engine Load Idle Speed Control.............................T2-2-10 Emergency Steering Control....................................T2-2-94
Forward/Reverse Idle Speed Limiter.....................T2-2-12 Combined Electric and Hydraulic Control Circuit..T2-2-97
Forward/Reverse Operation Engine Speed Bucket Auto Leveler Control.....................................T2-2-98
Limiter.........................................................................T2-2-14 Lift Arm Float Control.............................................. T2-2-100
Load-free Engine High Idle Limiter........................T2-2-16
Engine Speed Regulator For Digging...................T2-2-18 Group 3 Engine System
Speed Limit Control with Power Mode OFF.......T2-2-20 Outline..................................................................................... T2-3-1
Driving Load Idle Speed Control.............................T2-2-22 Engine Sensors..................................................................... T2-3-2
Aftertreatment Device Manual Regeneration Fuel Injection Control......................................................... T2-3-3
Control........................................................................T2-2-24 Operation of Fuel Injection......................................... T2-3-3
Pump Control......................................................................T2-2-27 Fuel Injection Volume Control................................... T2-3-4
Base Torque Control....................................................T2-2-28 Fuel Injection Pressure Control................................. T2-3-4
Torque Decrease Control While Dumping Fuel Injection Timing Control.................................... T2-3-4
Bucket..........................................................................T2-2-30 Fuel Injection Rate and Frequency Control.......... T2-3-4
Lift Arm Speed Multiplication Control..................T2-2-32 EGR Control............................................................................ T2-3-6
Transmission Control........................................................T2-2-34 Preheating Control.............................................................. T2-3-8
Neutral Control..............................................................T2-2-36 Variable Turbocharger Control........................................ T2-3-9
Forward/Reverse Lever Priority Control...............T2-2-38 Urea SCR System................................................................T2-3-10
Manual Speed Shift Control.....................................T2-2-40 DEF Dosing Control.....................................................T2-3-10
Automatic Speed Shift Control................................T2-2-42 DEF Priming Control....................................................T2-3-10
Downshift Control........................................................T2-2-44 DEF Defrosting/Heat-Retention Control..............T2-3-12
Speed Shift Delay Control.........................................T2-2-46 DEF Purging Control....................................................T2-3-12
Declutch Control..........................................................T2-2-48 Engine Output Restriction (Inducement)..................T2-3-14
Shift Holding Control..................................................T2-2-50 Insufficient DEF Level..................................................T2-3-16
Lock Up Control............................................................T2-2-52 Malfunction of Urea SCR System............................T2-3-17
Fan Control, Valve Control..............................................T2-2-55 Aftertreatment Device.....................................................T2-3-18
Fan Speed Control........................................................T2-2-56 Outline..............................................................................T2-3-18
Fan Reverse Rotation Control..................................T2-2-58 Operation........................................................................T2-3-19
Lift Arm and Bucket Selection Circuit Control...T2-2-60 Aftertreatment Device Regeneration Control.........T2-3-20
Ride Control....................................................................T2-2-62 Aftertreatment Device Regeneration
JSS Control System (Option)..........................................T2-2-65 Operation...................................................................T2-3-20
Joystick Steering Lever Control...............................T2-2-68 Auto Regeneration (Automatic Cleaning)...........T2-3-20
Forward/Reverse Switch Control............................T2-2-70 Manual Regeneration.................................................T2-3-20
JSS Alarm Control.........................................................T2-2-72 Regeneration Inhibit Setting....................................T2-3-20
Other Control......................................................................T2-2-75 Engine Output Restriction (Inducement) Due To
Transmission Alarm Control.....................................T2-2-76 Aftertreatment Device Regeneration Inhibit.....T2-3-22
Parking Brake Operation Indicator Control.........T2-2-78
TONGE40-EN-00 NGE40T-2-1
--- Page 9 ---
SECTION 2 SYSTEM
Group 2 Control System
Engine Control System Layout
(a)
(b)
(c)
90Z7BT02-02-01
a- Brake Pedal Position: Lightly b- OFF c- Brake Pedal Position: Fully
applied applied
1- Accelerator Pedal 15- Coolant Temperature Sensor 26- Reverse Position 39- AUTO 1 Mode
2- Accelerator Pedal Sensor 16- Transmission 27- Forward/Reverse Switch 40- Starter Key Switch
3- Main Controller (MC) 17- Machine Speed Sensor 28- Forward/Reverse Selector 41- Hydraulic Oil Temperature
4- Column Display Controller (Backup) Switch Sensor
5- Controller Area Network (CAN) 18- Torque Converter Oil 29- Pump Delivery Pressure Sensor 42- Pressure Sensor (Lift Arm
6- Air Conditioner Controller Temperature Sensor 30- Torque Control Solenoid Valve Raise)
7- Maintenance Pro (MP) Dr. 19- Torque Converter Input Speed 31- Parking Brake Solenoid Valve 43- Pressure Sensor (Bucket Roll
8- Monitor Sensor 32- Pressure Sensor (Parking Back)
9- Monitor Controller 20- Torque Converter Output Brake) 44- Brake Pedal (Left)
10- Engine Control Module (ECM) Speed Sensor 33- Parking Brake Switch 45- Pressure Sensor (Brake
11- Engine 21- Machine Speed Sensor 34- Declutch Position Switch Secondary Pressure)
12- Exhaust Gas Temperature 22- Shift Switch 35- Power Mode Selector Switch 46- Brake Pedal (Right)
Sensor 23- Forward/Reverse Lever 36- Travel Mode Selector Switch 47- Brake Pedal (Right) Switch
13- Crankshaft Speed Sensor 24- Forward Position 37- AUTO 2 Mode 48- Aftertreatment Device
14- Camshaft Speed Sensor 25- Neutral Position 38- Manual Mode Regeneration Switch
TONGE40-EN-00 T2-2-5
--- Page 10 ---
SECTION 2 SYSTEM
Group 2 Control System
(a)
(b)
(c)
90Z7B-02-02-10
a- Brake Pedal Position: Lightly b- OFF c- Brake Pedal Position: Fully
applied applied
1- Accelerator Pedal 15- Coolant Temperature Sensor 26- Reverse Position 39- AUTO 1 Mode
2- Accelerator Pedal Sensor 16- Transmission 27- Forward/Reverse Switch 40- Starter Key Switch
3- Main Controller (MC) 17- Machine Speed Sensor 28- Forward/Reverse Selector 41- Hydraulic Oil Temperature
4- Column Display Controller (Backup) Switch Sensor
5- Controller Area Network (CAN) 18- Torque Converter Oil 29- Pump Delivery Pressure Sensor 42- Pressure Sensor (Lift Arm
6- Air Conditioner Controller Temperature Sensor 30- Torque Control Solenoid Valve Raise)
7- Maintenance Pro (MP) Dr. 19- Torque Converter Input Speed 31- Parking Brake Solenoid Valve 43- Pressure Sensor (Bucket Roll
8- Monitor Sensor 32- Pressure Sensor (Parking Back)
9- Monitor Controller 20- Torque Converter Output Brake) 44- Brake Pedal (Left)
10- Engine Control Module (ECM) Speed Sensor 33- Parking Brake Switch 45- Pressure Sensor (Brake
11- Engine 21- Machine Speed Sensor 34- Declutch Position Switch Secondary Pressure)
12- Exhaust Gas Temperature 22- Shift Switch 35- Power Mode Selector Switch 46- Brake Pedal (Right)
Sensor 23- Forward/Reverse Lever 36- Travel Mode Selector Switch 47- Brake Pedal (Right) Switch
13- Crankshaft Speed Sensor 24- Forward Position 37- AUTO 2 Mode
14- Camshaft Speed Sensor 25- Neutral Position 38- Manual Mode
TONGE40-EN-00 T2-2-15
--- Page 11 ---
SECTION 2 SYSTEM
Group 2 Control System
90Z7B-02-02-52
1- Accelerator Pedal 16- Transmission 28- Forward/Reverse Selector 42- Aftertreatment Device
2- Accelerator Pedal Sensor 17- Machine Speed Sensor Switch Regeneration Switch
3- Main Controller (MC) (Backup) 29- Pump Delivery Pressure Sensor 44- Brake Pedal (Left)
4- Column Display Controller 18- Torque Converter Oil 30- Torque Control Solenoid Valve 45- Pressure Sensor (Brake
5- Controller Area Network (CAN) Temperature Sensor 31- Parking Brake Solenoid Valve Secondary Pressure)
6- Air Conditioner Controller 19- Torque Converter Input Speed 32- Pressure Sensor (Parking 46- Brake Pedal (Right)
7- Maintenance Pro (MP) Dr. Sensor Brake) 47- Brake Pedal (Right) Switch
8- Monitor 20- Torque Converter Output 33- Parking Brake Switch
9- Monitor Controller Speed Sensor 34- Declutch Position Switch
10- Engine Control Module (ECM) 21- Machine Speed Sensor 35- Power Mode Selector Switch
11- Engine 22- Shift Switch 36- Travel Mode Selector Switch
12- Exhaust Gas Temperature 23- Forward/Reverse Lever 37- AUTO 2 Mode
Sensor 24- Forward Position 38- Manual Mode
13- Crankshaft Speed Sensor 25- Neutral Position 39- AUTO 1 Mode
14- Camshaft Speed Sensor 26- Reverse Position 40- Starter Key Switch
15- Coolant Temperature Sensor 27- Forward/Reverse Switch 41- Pressure Sensor (Pilot Primary)
TONGE40-EN-00 T2-2-25
--- Page 12 ---
SECTION 2 SYSTEM
Group 2 Control System
(a)
(b)
(c)
90Z7B-02-02-27
a- Brake Pedal Position: Lightly b- OFF c- Brake Pedal Position: Fully
applied applied
1- Accelerator Pedal 14- Torque Converter Oil 22- Speed Shift Solenoid Valve 35- Travel Mode Selector Switch
2- Accelerator Pedal Sensor Temperature Sensor 23- Shift Switch 36- AUTO 2 Mode
3- Main Controller (MC) 15- Torque Converter Input 24- Forward/Reverse Lever 37- Manual Mode
4- Column Display Controller Speed Sensor 25- Forward Position 38- AUTO 1 Mode
5- Controller Area Network 16- Torque Converter Output 26- Neutral Position 39- Key Switch
(CAN) Speed Sensor 27- Reverse Position 40- Brake Pedal (Left)
6- Monitor 17- Machine Speed Sensor 28- Forward/Reverse Switch 41- Pressure Sensor (Brake
7- Monitor Controller (Backup) 29- Forward/Reverse Selector Secondary Pressure)
8- Engine Control Module (ECM) 18- Machine Speed Sensor Switch 42- Brake Pedal (Right)
9- Engine 19- Forward Clutch Solenoid 30- Parking Brake Solenoid Valve 43- Brake Pedal (Right) Switch
10- - Valve 31- Pressure Sensor (Parking 44- Lift Arm Angle Sensor
11- Downshift Switch (DSS) 20- Lock-Up Clutch Solenoid Brake) 45- Pressure Sensor (Lift Arm
12- Hold Switch Valve 32- Parking Brake Switch Raise)
13- Transmission 21- Reverse Clutch Solenoid 33- Declutch Position Switch 46- Pressure Sensor (Bucket
Valve 34- Power Mode Selector Switch Dump)
TONGE40-EN-00 T2-2-35
--- Page 13 ---
SECTION 2 SYSTEM
Group 2 Control System
90Z7B-02-02-32
1- Accelerator Pedal 15- Torque Converter Input 24- Forward/Reverse Lever 37- Manual Mode
2- Accelerator Pedal Sensor Speed Sensor 25- Forward Position 38- AUTO 1 Mode
3- Main Controller (MC) 16- Torque Converter Output 26- Neutral Position 39- Key Switch
4- Column Display Controller Speed Sensor 27- Reverse Position 40- Brake Pedal (Left)
5- Controller Area Network 17- Machine Speed Sensor 28- Forward/Reverse Switch 41- Pressure Sensor (Brake
(CAN) (Backup) 29- Forward/Reverse Selector Secondary Pressure)
6- Monitor 18- Machine Speed Sensor Switch 42- Brake Pedal (Right)
7- Monitor Controller 19- Forward Clutch Solenoid 30- Parking Brake Solenoid Valve 43- Brake Pedal (Right) Switch
8- Engine Control Module (ECM) Valve 31- Pressure Sensor (Parking 44- Lift Arm Angle Sensor
9- Engine 20- Lock-Up Clutch Solenoid Brake) 45- Pressure Sensor (Lift Arm
11- Downshift Switch (DSS) Valve 32- Parking Brake Switch Raise)
12- Hold Switch 21- Reverse Clutch Solenoid 33- Declutch Position Switch 46- Pressure Sensor (Bucket
13- Transmission Valve 34- Power Mode Selector Switch Dump)
14- Torque Converter Oil 22- Speed Shift Solenoid Valve 35- Travel Mode Selector Switch
Temperature Sensor 23- Shift Switch 36- AUTO 2 Mode
TONGE40-EN-00 T2-2-45
--- Page 14 ---
SECTION 2 SYSTEM
Group 2 Control System
Fan Control, Valve Control
The fan control system and valve control consist of the
following.
Fan Speed Control
Fan Reverse Rotation Control
Lift Arm and Bucket Selection Circuit Control
Ride Control
TONGE40-EN-00 T2-2-55
--- Page 15 ---
SECTION 2 SYSTEM
Group 2 Control System
JSS Control System (Option)
JCU (Joystick Steering Control Unit) is mainly used for the
joystick steering control of the vehicle operation. Each
signal from the armrest switch, joystick steering selector
switch, and joystick steering lever is sent to JCU and is
processed in the logic circuit.
JCU activates the 2-spool solenoid valve unit and cut off
solenoid valve, and controls the steering operation of the
vehicle.
f NOTE: JCU is an optional controller.
fNOTE: JSS: Joystick Steering System
TONGE40-EN-00 T2-2-65
--- Page 16 ---
SECTION 2 SYSTEM
Group 2 Control System
Other Controls
The other controls consist of the followings.
Transmission Alarm Control
Parking Brake Operation Indicator Control
Brake Low Oil Pressure Indicator Control
Low Steering Oil Pressure Indicator Control
Overrun Alarm Control
Lift Arm Auto Leveler Height Kickout Control
Lift Arm Auto Leveler Lower Kickout Control
Quick Power Mode Control
Auto Shut-Down Control
Emergency Steering Control
TONGE40-EN-00 T2-2-75
--- Page 17 ---
SECTION 2 SYSTEM
Group 2 Control System
90Z7B-02-02-40
1- Main Controller (MC) 11- Torque Converter Output 18- Parking Brake Switch 27- Parking Brake Indicator
2- Column Display Controller Speed Sensor 19- Pressure Sensor (Brake Primary 28- Low Brake Oil Pressure
3- Air Conditioner Controller 12- Machine Speed Sensor Pressure) Indicator
4- Monitor (Backup) 20- Steering Pressure Switch 29- Low Steering Oil Pressure
5- Monitor Controller 13- Machine Speed Sensor 21- Brake Pedal (Left) Indicator
6- Engine Control Module (ECM) 14- Forward/Reverse Lever 22- Pressure Sensor (Brake 30- Controller Area Network (CAN)
7- Engine 15- Forward/Reverse Switch Secondary Pressure)
9- Transmission 16- Parking Brake Solenoid Valve 23- Brake Pedal (Right)
10- Torque Converter Input Speed 17- Pressure Sensor (Parking 24- Brake Pedal (Right) Switch
Sensor Brake) 25- Alarm
TONGE40-EN-00 T2-2-85
--- Page 18 ---
SECTION 2 SYSTEM
Group 2 Control System
90TNED-02-02-47
a- To Steering Valve
1- Main Controller (MC) 8- Camshaft Speed Sensor 15- Steering Pressure Switch 21- Emergency Steering Pump
2- Column Display Controller 9- Crankshaft Speed Sensor 16- Emergency Steering Pump
3- Monitor 11- Transmission Delivery Pressure Sensor
4- Monitor Controller 12- Machine Speed Sensor 17- Accelerator Pedal
5- Controller Area Network 13- Pump Delivery Pressure 18- Accelerator Pedal Sensor
(CAN) Sensor 19- Emergency Steering Pump
6- Engine Control Module (ECM) 14- Emergency Steering Check Relay
7- Engine Switch 20- Emergency Steering Motor
TONGE40-EN-00 T2-2-95
--- Page 19 ---
SECTION 2 SYSTEM
Group 3 Engine System
Fuel Injection Control
Engine Control Module (ECM) monitors the engine
operation status according to the signals from each
sensor and the Main Controller (MC), and provides
outputs for the following fuel injection control.
ECM controls:
Fuel Injection Volume
Fuel Injection Timing
Fuel Injection Rate and Frequency
Fuel Injection Pressure
Solenoid ON 1
+
Operation of Fuel Injection:
- 2
1. Pressurized fuel from the supply pump is supplied
to the common rail in the cylinder head.
4