PDF Operation & Maintenance Manual Bobcat 751 Loader - 3 MB
Learn to operate and maintain your Bobcat 751 loader with this official manual.
It covers all aspects of daily operation, safety procedures, and routine maintenance schedules.
Following this guide will help you keep your versatile skid-steer loader in excellent working condition for years to come.
PDF Viewer
Viewer loads when you scroll here
SHARE THIS MANUAL
Download the PDF Manual
PDF viewer loading area
Text Preview from This Manual
The text below was extracted from the visible preview pages to help you confirm the manual contents before download.
--- Page 1 ---
Operation
&
Maintenance
Dealer Copy -- Not for Resale
Manual
S/N 515730001 & Above
S/N 515620001 & Above
Doosan purchased Bobcat Company from Ingersoll-Rand Company in
2007. Any reference to Ingersoll-Rand Company or use of trademarks,
service marks, logos, or other proprietary identifying marks belonging
to Ingersoll-Rand Company in this manual is historical or nominative
in nature, and is not meant to suggest a current affiliation between
Ingersoll-Rand Company and Bobcat Company or the products of
either.
EQUIPPED WITH
BOBCAT INTERLOCK
CONTROL SYSTEM (BICSTM)
6900967 (9–00) Revised (6-12) Printed in U.S.A. © Bobcat Company 2000
1 of 118
--- Page 3 ---
FEATURES AND ACCESSORIES
Model 751 Bobcat loaders are equipped with the following standard items:
Bob–Tach
Spark Arrestor Muffler
Lift Arm Support Device
Operator Cab (with ROPS & FOPS Approval)
Bobcat Interlock Control System (BICS™)
Seat Belt
Seat Bar
Parking Brake
Gauges/Warning Lights
Automatically Activated Glow Plugs
Tires, 10–16.5, 8PR Bobcat Heavy Duty
Adjustable Cushion Seat
Below is a list of some equipment available from your Bobcat Loader dealer as Dealer and / or Factory Installed
Accessories. See your Bobcat dealer for other available options, accessories and attachments.
Tires Instrumentation
10–16.5, 8PR Bobcat Heavy Duty Deluxe Instrumentation Panel (Includes Keyless Start)
(machine Width – 60 or 66 inches) Automatic Shutdown Feature
31 x 15.5–15, 8PR Ultra Grip Tread
7.50 x 15 Air Boss Segmented Tires Hydraulics
10 x 16.5 Air Boss Segmented Tires
6.5–16 Solid Tires Rear Auxiliary Hydraulics
Hydraulic Bucket Positioning (Includes On/Off Selection)
Operator Cab
Front and Rear Lights Other
Deluxe Cab Kit
FOPS Kit (Level II) Catalytic Exhaust Purifier
Top and Rear Cab Windows Engine Block Heater
Rear Window Wiper Single Point Lift
Side Windows Radiator Screen Kit
Cab Door Tailgate Lock
Vinyl Cab Enclosure Tool Box
Heater Kit Counterweight Kit
Deluxe Suspension Seat (Cloth or Vinyl) Dual Attachment Control Kit
Horn G–Series 7–Pin Attachment Control Kit
Back–up Alarm
Cover Kit (Pedals Area)
Fire Extinguisher
Strobe Light or Rotating Beacon
Flasher Lights Kit
Seat Belt with 3–Point Restraint
3” Seat Belt
Special Applications Kit*
*Includes Lexan Front Door; Top & Rear Windows.
Specifications subject to
change without notice
751 Bobcat Loader
vii Operation & Maintenance Manual
--- Page 4 ---
OPERATING INSTRUCTIONS
ATTACHMENTS & BUCKETS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 ...
Bob–Tach . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
.....
Installing the Bucket or Attachment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25 ..
Removing the Bucket or Attachment . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26 ..
DAILY INSPECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
....
ENGINE SPEED CONTROL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8. . .
HYDRAULIC CONTROLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 ... OPERATING
Attachment Auxiliary Hydraulics (If Equipped) . . . . . . . . . . . . . . . . . . . . . . . .13 . INSTRUCTIONS
Attachment Control Device (ACD) (If Equipped) . . . . . . . . . . . . . . . . . . . . . .14 .
Auxiliary Hydraulics Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 ...
Disengage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 ....
Maximum Flow Only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 ....
Variable Flow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 ....
Bucket Position Valve Operation (If Equipped) . . . . . . . . . . . . . . . . . . . . . . .14 .
Front Auxiliary Hydraulics Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 ..
Variable Flow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 ....
Maximum Flow Only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 ....
Foot Pedals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
....
Lift Arm Float Position
Lift Arm Operation
Tilt Operation
Advanced Hand Controls (If Equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 ..
Lift Arm Float Position
Lift Arm Operation
Tilt Operation
Quick Couplers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 ....
Rear Auxiliary Hydraulics Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 ..
Releasing Hydraulic Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 ...
INSTRUMENT PANEL IDENTIFICATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3. .
Left Panel
Standard & Deluxe Instrument Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3. .
Right Panel
Standard Instrument Panel (With Key Switch) . . . . . . . . . . . . . . . . . . . . . . .4.
Deluxe Instrument Panel (With Keyless Start) . . . . . . . . . . . . . . . . . . . . . . .5.
Option & Field Accessory Panels
Side Accessory Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6. . .
Front Accessory Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6. . .
LIFT ARM BY–PASS CONTROL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7. . .
LIFTING THE LOADER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 ....
Single Point Lift . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
....
MONITORING THE DISPLAY PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
..
751 Bobcat Loader
1 Operation & Maintenance Manual
--- Page 5 ---
HYDRAULIC CONTROLS
Put your feet on the pedals (or footrests) and KEEP THEM
THERE any time you operate the loader.
Two foot pedals (or hand controls) (Item 1) [A] and [B]
control the hydraulic cylinders for the lift and tilt functions.
Foot Pedals Keep both feet on pedals or footrests while
operating machine. Failure to do so can cause
Lift Arm Operation [A] serious injury.
The left pedal controls the lift arms. W–2359–1099
Push on the bottom (heel) (Item 2) [A] of the pedal to
raise the lift arms.
Push on the top (toe) (Item 3) [A] of the pedal to lower
the lift arms.
Lift Arm Float Position [A] Foot Pedals
Push the top (toe) (Item 3) [A] of the pedal all the way A 3
forward until it locks into the float position.
Use the float position of the lift arms to level loose 2
material while driving backward.
Push the bottom of the left pedal to unlock from the
float 1 B–12830
position. Hand Controls
1
Tilt Operation [B]
The right pedal controls the bucket.
4
Push the bottom (heel) (Item 2)[B] of the pedal to tilt the
bucket backward. 6
5 B–15781
Push the top (toe) (Item 3) [B] of the pedal to tilt the
bucket forward.
Advanced Hand Controls (If Equipped)
Lift Arm Operation [A]
The left hand lever controls the lift arms.
Move the left hand lever away from the operator (Item
4) [A] to raise the lift arms.
B–15579
Move the left hand lever toward the operator (Item 5) Foot Pedals
[A] to lower the lift arms.
B 3
Lift Arm Float Position [A]
Move the left hand lever all the way toward the operator 2
(Item 5) [A] until it locks into the float position.
Later AHC Models With Float Button 1
– Press anbd hold the Float Button (Item 6) [A] B–12830
before moving the lever. Hand Controls
– Press again to disengage. 1
Use the float position of the lift arms to level loose 4
material while driving backward.
Move the left hand lever upward to unlock from thefloat 5
position. B–15781
Tilt Operation [B]
The right hand lever controls the bucket.
Move the right hand lever toward the operator (Item
5) [B] to tilt the bucket backward.
Move the right hand lever away from the
operator (Item 4) [B] to tilt the bucket forward.
B–155811
751 Bobcat Loader
11 Operation & Maintenance Manual
--- Page 6 ---
STARTING THE ENGINE (Cont’d)
Deluxe Instrument Panel (Cont’d)
A
Release the START Button when the engine starts.
Press the PRESS TO OPERATE LOADER Button (Item 1) PRESS FOR CODES
[A] to activate the BICS system and to perform hydraulic
and loader functions.
See Cold Temperature Starting, Page 22.
1
B–15551
AVOID INJURY OR DEATH
• Engines can have hot parts and hot exhaust
gas. Keep flammable material away.
• Do not use machines in atmosphere
containing explosive gas.
W–2051–1086
When an engine is running in an enclosed
area, fresh air must be added to avoid
concentration of exhaust fumes. If the engine
is stationary, vent the exhaust outside.
Exhaust fumes contain odorless, invisible
gases which can kill without warning.
W–2050–1285
751 Bobcat Loader
21 Operation & Maintenance Manual
--- Page 8 ---
PARKING THE BOBCAT LOADER
Stop the Bobcat loader on level ground.
A
Lower the lift arms fully and put the attachment flat on the
ground [A].
Pull the engine speed control lever all the way backward.
Turn the key switch to ST OP (Standard Panel) OR press
the STOP Button (Deluxe Panel).
Before you leave the operator’s seat:
• Lower the lift arms, put the attachment flat on
the ground.
• Stop the engine.
• Engage the parking brake. B–15629
• Raise seat bar.
• (Foot Pedal Controls) Move pedals until both
lock.
• (Advanced Hand Controls) Move the hand
controls to the NEUTRAL POSITION to make
sure that both lift and tilt functions are
deactivated.
The seat bar system must deactivate the lift
and tilt control functions when the seat bar is
up. Service the system if hand controls do
not deactivate.
W–2327–0798
Engage the parking brake.
Lift the seat bar and make sure the lift and tilt functions are
deactivated.
Unbuckle the seat belt.
Remove the key from the switch (Standard Panel) to
prevent operation of the loader by unauthorized personnel.
751 Bobcat Loader
31 Operation & Maintenance Manual
--- Page 9 ---
LIFT ARM SUPPORT DEVICE (Cont’d)
Disengaging The Lift Arm Support Device
A
Remove the pin from the lift arm support device.
Connect the spring (Item 1) [A] from the lift arm support
device to the bracket below the lift arms.
With the operator in the seat, seat belt fastened and seat 1
bar lowered, start the engine.
Press the PRESS TO OPERATE LOADER button.
Raise the lift arms a small amount and the spring will lift the
support device off the lift cylinder rod. Lower the lift arms.
Stop the engine. N–20523
Raise the seat bar. Move the hand controls (if equipped) to
neutral position. Move pedals (if equipped) until both
pedals lock. B 2
Disconnect the spring from the bracket.
Raise the support device into storage position and insert
pin (Item 1) [B] through lift arm support device (Item 2)[B]
and bracket. Connect spring to pin. 1
Remove jackstands.
N–20526
HEATER C
1
Filter Cleaning and Maintenance
The heater filters require regular inspection and
maintenance. (See SERVICE SCHEDULE, Page 39 for
intervals.)
Filters
The Fresh Air Filter is located below the rear window ofthe
cab (Item 1) [C].
Remove the bolts and remove the filter housing. 2
Shake the filter or use low air pressure to remove dirt.
N–21536
Reinstall the filter and housing.
The Recirculation Filter is located in front of the rear
window inside the cab (Item 2) [C].
Remove the clamping knobs, grill and filter.
Clean the filter with water and mild detergent. Reinstall the
filter.
Troubleshooting
If the fan does not run, check the fuse. (SeeELECTRICAL
SYSTEM, Page 56.)
751 Bobcat Loader
41 Operation & Maintenance Manual
--- Page 10 ---
AIR CLEANER SERVICE (Cont’d)
Replacing Filter Element (Cont’d)
A
Inner Filter
Only replace the inner filter element (Item 1) [A] under the
following conditions:
8.
• Replace the inner filter element everythird time the outer
filter is replaced.
• After the outer element has been replaced, start the
engine and run at full RPM. If the HOURMETER / 1
CODE DISPLAY shows [01–17] (Air Filter Plugged),
replace the inner filter element.
N–20596
Remove the wing nut and remove the inner filter element
(Item 1) [A].
9.
NOTE: Make sure all sealing surfaces are free of dirt B
and debris.
Install the new inner element.
Install the outer element.
Install the dust cover and the wing nut [B].
N–20600
751 Bobcat Loader
51 Operation & Maintenance Manual
--- Page 11 ---
ELECTRICAL SYSTEM (Cont’d)
Removing And Installing The Battery
A
1 2
Batteries contain acid which burns eyes and
skin on contact. Wear goggles, protective
clothing and rubber gloves to keep acid off
body.
In case of acid contact, wash immediately with
water. In case of eye contact get prompt medical N–20601
attention and wash eye with clean, cool water
for at least 15 minutes.
If electrolyte is taken internally drink large
B
quantities of water or milk! DO NOT induce
vomiting. Get prompt medical attention.
W–2065–1296
Open the rear door.
Disconnect the negative (–) battery cable (Item 1) [A]. 1
Remove the battery hold down clamp (Item 2) [A].
Disconnect the positive (+) battery cable (Item 1) [B].
Remove the battery from the loader.
N–20604
Always clean the battery terminals and cable ends when
installing a new or used battery [C]. C
When installing the battery in the loader, do not touch any
metal parts with the battery terminals.
Connect the negative (–) cable last to prevent
sparks.Connect and tighten the battery cables.
Close the rear door before operating the loader.
P–09589 P–09590
751 Bobcat Loader
61 Operation & Maintenance Manual
--- Page 12 ---
BOB–TACH
Inspection and Maintenance A
Move the Bob–Tach levers to engage the wedges[A]. The
levers and wedges must move freely.
1
The wedges must extend through the holes in the
attachment mounting frame (Item 1) [A]. N–17022
Bob–Tach wedges must extend through the N–17027
holes in attachment. Levers must be fully
down and locked. Failure to secure wedges
can allow attachment to come off and cause
injury or death. B
W–2102–0588
The spring loaded wedge (Item 1) [A] must contact the
lower edge of the hole in the attachment (Item 1) [B] and
[C].
If the wedge does not contact the lower edge of the hole
[B]
and [C], the attachment will be loose and can come off the
Bob–Tach.
1
N–17023
C Bob–Tach
Wedge
Wedge Must Contact
Lower Edge Of Hole
In The Attachment
B–15177
Inspect the mounting frame on the attachment and the
Bob–Tach, linkages and wedges for excessive wear or
damage [D]. Replace any parts that aredamaged, bent, or
D
missing. Keep all fasteners tight.
Look for cracked welds. Contact your Bobcat dealer for
repair or replacement parts.
Lubricate the wedges (See SERVICE SCHEDULE, Page
39 and LUBRICATION OF THE BOBCAT LOADER, Page
69).
TS–01062
751 Bobcat Loader
71 Operation & Maintenance Manual
--- Page 13 ---
IMPORTANTE (SPANISH)
ESTA MAQUINA EST A EQUIPADA PORLA FABRICA
CON UN AMOR TIGUADOR DE CHISPAS DEL
SILENCIADOR, APROBADO POR EL SER VICIO DE
SILVICULTURA DEL U.S.D.A. (DEP ARTMENTO DE
AGRICULTURA DE LOS ESTADOS UNIDOS).
ES NECESARIO LIMPIAR ESTE AMOR TIGUADOR DE
CHISPAS DEL SILENCIADOR PARA MANTENERLO EN
BUEN ESTADO. HAY QUE DARLE SER VICIO AL
AMORTIGUADOR, VACIANDO LA CAMARA DE
CHISPAS CADA 100 HORAS DE FUNCIONAMIENTO.
SI ESTA MAQUINA ESTA DESTINADA PARA
TRABAJAR EN BOSQUES, MATORRALES O
EN PASTOS QUE PUEDAN INCENDIARSE,
ENTONCES TIENE QUE ESTAR EQUIPADA
CON UN AMOR TIGUADOR DE CHISPAS EN EL
SISTEMA DEL ESCAPE Y TIENE QUE MANTENERSE
EN PERFECTAS CONDICIONES DE TRABAJO. ES NO
HACER ESTO CONSTITUYE UNA INFRACCION DE LA
LEY ESTATAL DE CALIFORNIA, SECCION 4442, PRC.
REFIERASE A LAS LEYES Y REGULACIONES
LOCALES EN CUANTO A LOS REQUISIT OS DEL
AMORTIGUADOR DE CHISPAS.
IMPORTANT (FRENCH)
CETTE CHARGEUSE EST EQUIPPEE A LA SORTIE DE
L’USINE D’UN SILENCIEUX P ARA–ETINCELLES
APPROUVE PAR LE SERVICE DES EAUX ET FORETS
DES ETATS–UNIS.
IL EST INDISPENSABLE D’EFFECTUER UN
ENTRETIEN REGULIER DE CE P ARE–ETINCELLES
AFIN DE LE GARDER EN BON ET AT DE MARCHE.
L’ENTRETIEN CONSISTE A VIDER LA CHAMBRE A
ETINCELLES TOUTES LES 100 HEURES DE MARCHE.
SI CET ENGIN EST UTILISE SUR UN TERRAIN
COUVERT D’ARBRES, DE BROUSSAILLES, OU
D’HERBAGES INFLAMMABLES, IL F AUT INSTALLER
LE PARE–ETINCELLES ET LE GARDER EN BON ETAT
DE MARCHE.
CONSULTER LES REGLEMENT ATIONS LOCALES
APPLICABLES.
751 Bobcat Loader
81 Operation & Maintenance Manual